| Inpuf and Oufput | |
| Input voliage | 12-48VDC |
| Output voliage | 3-46VDC |
| Ouput current | 1CH,350mA/700mA |
| Output power | 1.05W-16.1W(350mA)
2.1W-32.2W(700mA) |
| Ouput ype | Constant volage |
| Dimming data | |
| Input signal | RF 2.4GHz + Push Dim |
| Control distance | 30m(Barrier-free space) |
| Dimming gray scale | 4096(2^12)vlakke |
| Dimming range | 0 -100% |
| Dimming curve | Logarithmic |
| Safety and EMC | |
| EMC standard (EMC) | EN301 489,EN 62479 |
| Safety standard(LVD | EN60950 |
| Radio Equipment(RED) | EN 300 328 |
| L1200*W50*H65mm ±3 | L1200*W50*H65mm ±3,EMC,LVD,RED |
| Dimming curve | Logarithmic |
| Environment | |
| Operation temperature | Ta: -30°C ~ +55°C |
| Case temperature (Max.) | T c:+85° C |
| IP rating | L1200*W50*H65mm ±3 |
| Warranty and Protection | |
| Waarborg | 5 jare |
| Protection | Reverse polarity Short circuit |
| Weight | |
| Net weight | 0.042kg |
| Gross weight | 0.058kg |
| Mechanical Structures and Installations |
| 1.The controller could auto check and output a proper voltage according to its LED quantities.
2.The controller works on buck mode, the voltage of power supply should be greater than the total voltage of the seried LEDs. |
| Match Remote Control (two match ways)
|
|
| End user can choose the suitable match/delete ways. Two options are offered for selection:
|
|
| Use the controller’s Match key
Match: Delete: |
Use Power Restart
Match: Delete: |
| Application notes
1.All the receivers in the same zone. |
| Auto-transmitting: One receiver can transmit the signals from the remote to another receiver within 30m,
as long as there is a receiver within 30m, the remote control distance can be limitless. Auto-synchronization: Multiple receivers within 30m distance can work synchronously when they are controlled by the same remote. Receiver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range. Strong signal sources such as WiFi routers and microwave ovens will affect the range. We recommend for indoor applications that receiver placements should be no further apart than15m.
2.Each receiver(one or more) in a different zone, like zone 1, 2, 3 or 4. |
| Push Dim Function
The provided Push-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switchs.
Turn on or off light.
Press and hold to step-less dimming, With every other long press, the light level goes to the opposite direction.
Light returns to the previous dimming level when switched off and on again, even at power failure.
If more than one controller are connected to the same push switch, do a long press for more than 10s, then the system is synchronized and all lights in the group dim up to 100%. This means there is no need for any additional synchrony wire in larger installations. We recommend the number of controllers connected to a push switch does not exceed 25 pieces, The maximum length of the wires from push to controller should be no more than 20 meter.
Dimming Curve
|
|
Malfunctions Analysis & Troubleshooting |
| Malfunctions | Causes | Troubleshooting |
| No light | 1. No power.
2.Wrong connection or insecure. |
1.Check the power.
2.Check the connection. |
| No response
from the remote |
1.The battery has no power.
2.Beyond controllable distance. 3.The controller did not match the remote. |
1.Replace battery.
2.Reduce remote distance. 3.Re-match the remote. |
| V1. Is dit in orde vir OEM en ODM ?
Pantserbeligting is professioneel vir OEM- en ODM-bestelling. Ons het 'n ryk ervaring om die produksie voort te sit en die goeie gehalte te verseker.
V2.Wat is die MOQ? Kan ek 'n paar monsters hê ? Lae MOQ, 1 stuks vir monsterkontrole kwaliteit is beskikbaar. Monsterbestelling is aanvaarbaar en verwelkom die pasgemaakte monsters vir u projek.
V3.Hoe lank van die Loodtyd? Voorbeeld behoeftes 3-5 dae, hoeveelheid bestelling benodig 10-15 dae
V4.Hoe stuur jy die goedere en hoe lank neem dit om te arriveer? Ons stuur gewoonlik deur DHL, UPS, FedEx of TNT. Dit neem gewoonlik 3-5 dae om te arriveer. Lugdiens- en seeversending ook opsioneel.
V5.Hoe om voort te gaan met 'n bestelling vir pasgemaakte lig ? Eerstens, laat weet ons jou vereistes of tekening.Tweedens, ons kwoteer volgens jou vereistes. Derde, jy bevestig en reël betaling vir formele bestelling.Uiteindelik, ons sal die produksie begin en versending reël.
V6.Hoe lank vir die waarborg? Al die Armour-beligtingsprodukte se kwaliteit is 3 jare, As pasgemaakte projekprodukte met 5 jaar waarborg.
V7. Is dit goed om my logo op die produk te druk ? Ja, lig ons asseblief formeel voor produksie in en bevestig die ontwerp eerstens op grond van ons monster.
V8.Hoe om die foutiewe te hanteer? Ons bied aan 2, 3 en 5 jaar se beperkte waarborg vir verskillende soorte produkte of verskillende vereistes van beligtingsprojekte. Gedurende hierdie periode, as kliënte die bewys het wat kwaliteitkwessies toon en daardie bewys deur pantserbeligtingsingenieurs goedgekeur is, ons wil graag die defekte vervang met nuwe gekwalifiseerde items. Neem asseblief kennis dat waarborg nie gelyk is aan lewensduur nie. Ons produkte het meer as 50 000 uur lange lewensduur.
V9. Kan ek u fabriek besoek? Sekerlik,welkom om ons fabriek te besoek. Kan ons jou besoekskedule voor twee dae en jou belangstellende produkte laat weet.
V10.Is jy fabriek of handelsmaatskappy? Ons is fabriek direk uitvoer na oor see mark.
V11. Verskaf jy led-beligting aan enige bekende handelsmerkwinkel Lighting? Ja,ons led-winkel Lighting het toevoer aan LANCOME gehad , LEGO,VOLGENDE,AFRIGTERS, Burt's Bee,Hasbro, Stewels，BRAUN,M&S ens. |
