Controller Supply-HM-V1-T

Controller Supply-HM-V1-T

RF remote, 0/1-10ቁ, Push Dim (3-in-1) መፍዘዝ.
4096 levels 0-100% dimming smoothly without any flflash.
Match with RF 2.4G single zone or multiple zone dimming remote control.

One RF controller accept up to 10 remote control.
Auto-transmitting function: Controller automatically transmit signal to another controller with 15m control distance.

Synchronize on multiple number of controllers.
Connect with external push switch to achieve on/off and 0-100% dimming function.

Light on/off fade time 3s selectable.
Over-heat / Over-load / Short circuit protection, recover automatically

ለእኛ ኢሜል ላክ አሁን ያነጋግሩ እንደ PDF አውርድ

የምርት ዝርዝር ግብረመልስ አሁን

Inpuf and Oufput
Input voliage	12-24VDC
Input current	20.5ሀ
Output voltage	12-24VDC
Output current	1CH,20ሀ
Output power	240W/480W (12V/24V)
Ouput ype	Constant volage

Dimming data
Input signal	RF 2.4GHz 0/1-10ቁ Push Dim
Control distance	15m(Barrier-free space)
Dimming gray scale	4096(2^12)levels
Dimming range	0 -100%
Dimming curve	Logarithmic
PWM Frequency	500Hz(default)

Safety and EMC
EMC standard (EMC)	ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4
Safety standard(LVD	EN 62368-1:2020+A11:2020
Radio Equipment(RED)	ETSI EN 300 328 V2.2.2
Certification	CE,EMC,LVD,RED

Environment
Operation temperature	ታ: -30°C ~ +55°C
Case temperature (ከፍተኛ.)	T c:+85°C
የአይፒ ደረጃ	አይፒ 20

Warranty and Protection

ዋስትና

5 ዓመታት

Protection

Reverse polarity

Over-heat

Over-load

Short circuit

ክብደት
Net weight	0.234kg
Gross weight	0.054kg

Mechanical Structures and Installations

Wiring Diagram

Note: The RF remote, 0/1-10V dimmer or Push switch can be connected at the same time,

which makes the product more user-friendly and more options to fit for some extra-ordinary demands.

Match Remote Control (two match ways)

End user can choose the suitable match/delete ways. Two options are offered for selection:

Use the controller’s Match key

Match:

Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) of the remote. The LED indicator fast flash a few times means match is successful.

Delete:
Press and hold match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted.

Use Power Restart

Match:
Switch off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times quickly. The light blinks 3 times means match is successful.

Delete:
Switch off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times quickly. The light blinks 5 times means all matched remotes were deleted.

0/1-10V Dimming

The 0/1-10V input is operable via commercially available simple rotary wall switchs designed for 0/1-10V dimming equipment or from decicated system central dimming controllers.

Compliant with 0-10V, 1-10ቁ, 10V PWM, RX(4 in 1).
We recommend the number of LED drivers connected to 0/1-10V dimmer does not exceed 5 pieces,The maximum length of the wires from dimmer to LED driver should be no more than 15 ሜትር.

If the controller be used with the RF remote or Push-Dim interface prior to using the 0/1-10V interface,the 0/1-10 V signal should change over 10% to return 0/1-10 V control.

Push Dim Function

The provided Push-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switchs.

Short press:

Turn on or off light.

Long press (1-6s):

Press and hold to step-less dimming,

With every other long press, the light level goes to the opposite direction.

Dimming memory:

Light returns to the previous dimming level when switched off and on again, even at power failure.

Synchronization:

If more than one controller are connected to the same push switch, do a long press for more than 10s,

then the system is synchronized and all lights in the group dim up to 100%.

This means there is no need for any additional synchrony wire in larger installations.

We recommend the number of controllers connected to a push switch does not exceed 25 pieces,

The maximum length of the wires from push to controller should be no more than 20 ሜትር.

Dimming Curve

Light on/off fade time

Long press match key 5s, then short press match key 3 times, the light on/off time will be set to 3s, the indicator light blink 3 times. Light on/off fade time Long press match key 10s, restore factory default parameter, the light on/off time also restore to 0.5s.

Malfunctions Analysis & Troubleshooting

Malfunctions	Causes	Troubleshooting
No light	1. No power. 2.Wrong connection or insecure.	1.Check the power. 2.Check the connection.
Uneven intensity between front and rear,with voltage drop	1. Output cable is too long. 2. Wire diameter is too small. 3.Overload beyond power supply capability. 4.Overload beyond controller capability.	1.Reduce cable or loop supply. 2.Change wider wire. 3.Replace higher power supply. 4.Add power repeater.
No response from the remote	1.The battery has no power. 2. Beyond controllable distance. 3.The controller did not match the remote.	1. Replace battery. 2.Reduce remote distance. 3. Re-match the remote.

Controller Supply-HM-V1-T-

Q1.ls ለ OEM እና ODM ምንም ችግር የለውም ?

ትጥቅ ማብራት ለ OEM እና ODM ትዕዛዝ ሙያዊ ነው።. ምርቱን የማስቀጠል እና ጥሩውን ጥራት ለማረጋገጥ የበለጸገ ልምድ አለን።.

Q2. MOQ ምንድን ነው? አንዳንድ ናሙናዎች ሊኖሩኝ ይችላሉ ?

ዝቅተኛ MOQ, 1 ፒሲዎች ለናሙና መፈተሻ ጥራት አለ የናሙናዎች ማዘዣ ተቀባይነት አላቸው እና ለፕሮጀክትዎ ብጁ ናሙናዎችን እንኳን ደህና መጡ.

Q3. የመሪነት ጊዜ ምን ያህል ነው?

ናሙና ፍላጎቶች 3-5 ቀናት, ብዛት ቅደም ተከተል 10-15 ቀናት ያስፈልገዋል

Q4.እቃዎቹን እንዴት እንደሚላኩ እና ለመድረስ ምን ያህል ጊዜ እንደሚወስድ?

እኛ ብዙውን ጊዜ በDHL እንልካለን።, ኡፕስ, FedEx ወይም TNT. ብዙውን ጊዜ ይወስዳል 3-5 ሊደርሱ ቀናት ይቀራሉ የአየር መንገድ እና የባህር ማጓጓዣ እንዲሁ አማራጭ ነው።.

Q5.ለ ብጁ ብርሃን ትዕዛዝ እንዴት እንደሚቀጥል ?

አንደኛ, የእርስዎን መስፈርቶች ወይም ስዕል ያሳውቁን.ሁለተኛ, እንደ መስፈርቶችዎ እንጠቅሳለን.ሦስተኛ, እርስዎ አረጋግጠዋል እና ለመደበኛ ትዕዛዝ ክፍያ ያዘጋጃሉ. በመጨረሻም, ምርቱን እንጀምራለን እና ጭነት እናዘጋጃለን.

Q6. ለዋስትናው ለምን ያህል ጊዜ?

ሁሉም የአርሞር ብርሃን ምርቶች ጥራት ነው። 3 ዓመታት, lf ብጁ የፕሮጀክት ምርቶች ከ 5 ዓመት ዋስትና ጋር.

Q7.ls የእኔን LoGo በምርቱ ላይ ማተም ምንም ችግር የለውም ?

አዎ, እባክዎን ከማምረትዎ በፊት በመደበኛነት ያሳውቁን እና ንድፉን በመጀመሪያ በእኛ ናሙና ላይ ያረጋግጡ.

Q8. ጥፋቱን እንዴት መቋቋም እንደሚቻል?

እናቀርባለን። 2, 3 እና 5 ለተለያዩ የምርት ዓይነቶች ወይም የመብራት ፕሮጄክቶች ልዩ ልዩ መስፈርቶች የአመት ውሱን ዋስትና. በዚህ ወቅት, ደንበኞች የማሳያ ጥራት ጉዳዮች ካላቸው እና ማስረጃው በጦር መሣሪያ ብርሃን መሐንዲሶች የጸደቀ ከሆነ, ጉድለት ያለባቸውን በአዲስ ብቁ እቃዎች መተካት እንፈልጋለን.

እባክዎን ዋስትና ከእድሜ ልክ ጋር እኩል እንዳልሆነ ልብ ይበሉ.የእኛ ምርቶች ከ 50000-ሰዓት በላይ የህይወት ዘመን አላቸው..

Q9.Can l የእርስዎን ፋብሪካ ይጎብኙ?

በእርግጠኝነት,ፋብሪካችንን ለመጎብኘት እንኳን ደህና መጡ. ከሁለት ቀናት በፊት የእርስዎን የጉብኝት መርሃ ግብር እና ፍላጎት ያላቸውን ምርቶች ያሳውቀናል።.

Q10.እርስዎ ፋብሪካ ወይም የንግድ ኩባንያ ነዎት?

እኛ ፋብሪካ በቀጥታ ወደ ባህር ገበያ እንልካለን።.

Q11.ለማንኛውም ታዋቂ የምርት መደብር የመብራት የሊድ መብራትን ታቀርባላችሁ?

አዎ,የእኛ መሪ ማከማቻ መብራት ለ LANCOME አቅርቦት ነበረው። , LEGO,ቀጣይ,አሠልጣኝ, የቡርት ንብ,ሃስብሮ, ቦት ጫማዎች，ብራውን,ኤም&ኤስ ወዘተ.