Controller Supply-HM-C1

Controller Supply-HM-C1

4096 levels 0-100% dimming smoothly without any flflash.
Match with Skydance’s 2.4G single zone or multiple zone dimming remote control.
One RF controller accept up to 10 remote control.
Auto-transmitting function: Controller automatically transmit signal to another controller with 30m control distance.
Synchronize on multiple number of controllers.
Connect with external push switch to achieve on/off and 0-100% dimming function.

Envieu-nos un correu electrònic Contacteu ara Descarrega com a PDF

Detall del producte Comentaris ara

Inpuf and Oufput
Input voliage	12-48VDC
Output voliage	3-46VDC
Ouput current	1CH,350mA/700mA
Output power	1.05W-16.1W(350mA) 2.1W-32.2W(700mA)
Ouput ype	Constant volage

Dimming data
Input signal	RF 2.4GHz + Push Dim
Control distance	30m(Barrier-free space)
Dimming gray scale	4096(2^12)levels
Dimming range	0 -100%
Dimming curve	Logarithmic

Safety and EMC
EMC standard (EMC)	EN301 489,EN 62479
Safety standard(LVD	EN60950
Radio Equipment(RED)	EN 300 328
Certificació	CE,EMC,LVD,RED
Dimming curve	Logarithmic

Environment
Operation temperature	Per: -30°C ~ +55°C
Case temperature (Màx.)	T c:+85°C
Classificació IP	IP20

Warranty and Protection
Garantia	5 anys
Protection	Reverse polarity Short circuit

Weight
Net weight	0.042kg
Gross weight	0.058kg

Mechanical Structures and Installations

1.The controller could auto check and output a proper voltage according to its LED quantities.

2.The controller works on buck mode, the voltage of power supply should be greater than the total voltage of the seried LEDs.

Match Remote Control (two match ways)

End user can choose the suitable match/delete ways. Two options are offered for selection:

Use the controller’s Match key

Match:
Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) on the remote.The LED indicator fast flash a few times means match is successful.

Delete:
Press and hold match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted.

Use Power Restart

Match:
Switch off the power, then switch on power again, immediately short press on/off key (single zone remote)or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful.

Delete:
Switch off the power, then switch on power again, immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.

Application notes

1.All the receivers in the same zone.

Auto-transmitting: One receiver can transmit the signals from the remote to another receiver within 30m,

as long as there is a receiver within 30m, the remote control distance can be limitless.

Auto-synchronization: Multiple receivers within 30m distance can work synchronously when they are controlled

by the same remote.

Receiver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range.

Strong signal sources such as WiFi routers and microwave ovens will affect the range.

We recommend for indoor applications that receiver placements should be no further apart than15m.

2.Each receiver(one or more) in a different zone, like zone 1, 2, 3 or 4.

Push Dim Function

The provided Push-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switchs.

Short press:

Turn on or off light.

Long press (1-6s):

Press and hold to step-less dimming,

With every other long press, the light level goes to the opposite direction.

Dimming memory:

Light returns to the previous dimming level when switched off and on again, even at power failure.

Synchronization:

If more than one controller are connected to the same push switch, do a long press for more than 10s,

then the system is synchronized and all lights in the group dim up to 100%.

This means there is no need for any additional synchrony wire in larger installations.

We recommend the number of controllers connected to a push switch does not exceed 25 pieces,

The maximum length of the wires from push to controller should be no more than 20 meters.

Dimming Curve

Malfunctions Analysis & Troubleshooting

Malfunctions

Causes

Troubleshooting

No light

1. No power.

2.Wrong connection or insecure.

1.Check the power.

2.Check the connection.

No response

from the remote

1.The battery has no power.

2.Beyond controllable distance.

3.The controller did not match the remote.

1.Replace battery.

2.Reduce remote distance.

3.Re-match the remote.

Controller Supply-HM-C1-

Q1.ls està bé per a OEM i ODM ?

La il·luminació d'armadura és professional per a comandes OEM i ODM. Tenim una gran experiència per continuar amb la producció i garantir la bona qualitat.

Q2.Quin és el MOQ? Puc tenir algunes mostres? ?

MOQ baix, 1 pcs per a la comprovació de la qualitat de la mostra està disponible. Les comandes de mostres són acceptables i donen la benvinguda a les mostres personalitzades per al vostre projecte.

Q3.Quant de temps del temps de lliurament?

Necessitats de mostra 3-5 dies, La comanda de quantitat necessita 10-15 dies

P4.Com s'envia la mercaderia i quant de temps triga a arribar?

Normalment enviem per DHL, UPS, FedEx o TNT. Normalment pren 3-5 dies per arribar. L'enviament aeri i marítim també és opcional.

Q5.Com procedir amb una comanda de llum personalitzada ?

Primer, fes-nos saber els teus requisits o dibuix. En segon lloc, cotitzem segons els vostres requisits. En tercer lloc, confirmeu i organitzeu el pagament de la comanda formal. Finalment, començarem la producció i organitzarem l'enviament.

Q6.Quant de temps per a la garantia?

Tots els productes d'il·luminació Armor són de qualitat 3 anys, Si productes de projecte personalitzats amb 5 anys de garantia.

Q7. Està bé imprimir el meu logotip al producte ?

Sí, si us plau, informeu-nos formalment abans de la producció i confirmeu el disseny en primer lloc en funció de la nostra mostra.

P8.Com tractar amb el defectuós?

Oferim 2, 3 i 5 garantia limitada d'un any per a diferents tipus de productes o diferents requisits de projectes d'il·luminació. Durant aquest periode, si els clients tenen proves que mostren problemes de qualitat i aquesta prova està aprovada pels enginyers d'il·luminació de l'armadura, ens agradaria substituir els defectuosos per nous articles qualificats.

Tingueu en compte que la garantia no és igual a la vida útil. Els nostres productes tenen una vida útil de més de 50.000 hores..

Q9.Puc visitar la vostra fàbrica?

Segur,Benvingut a visitar la nostra fàbrica. Pot fer-nos saber el vostre horari de visites abans de dos dies i els vostres productes interessats.

Q10. Sou fàbrica o empresa comercial?

Som una fàbrica que exportem directament al mercat marítim.

Q11.Suministreu il·luminació led a qualsevol botiga de marca famosa Il·luminació?

Sí,la nostra botiga led Lighting tenia subministrament a LANCOME , LEGO,PRÒXIM,ENTRENADOR, L'abella de Burt,Hasbro, Botes，BRAUN,M&S etc.