Controller Supply-HM-C1

Controller Supply-HM-C1

4096 levels 0-100% dimming smoothly without any flflash.
Match with Skydance’s 2.4G single zone or multiple zone dimming remote control.
One RF controller accept up to 10 remote control.
Auto-transmitting function: Controller automatically transmit signal to another controller with 30m control distance.
Synchronize on multiple number of controllers.
Connect with external push switch to achieve on/off and 0-100% dimming function.

Saada meile e-kiri Võtke nüüd ühendust Laadige alla PDF-failina

Toote detail Tagasiside kohe

Inpuf and Oufput
Input voliage	12-48VDC
Output voliage	3-46VDC
Ouput current	1CH,350mA/700mA
Output power	1.05W-16.1W(350mA) 2.1W-32.2W(700mA)
Ouput ype	Constant volage

Dimming data
Input signal	RF 2.4GHz + Push Dim
Control distance	30m(Barrier-free space)
Dimming gray scale	4096(2^12)levels
Dimming range	0 -100%
Dimming curve	Logarithmic

Ohutus ja EMC
EMC standard (EMC)	EN301 489,EN 62479
Safety standard(LVD	EN60950
Radio Equipment(PUNANE)	EN 300 328
Certification	SEE,EMC,LVD,PUNANE
Dimming curve	Logarithmic

Keskkond
Operation temperature	Vastamisi: -30°C ~ +55°C
Case temperature (Max.)	T c:+85°C
IP reiting	IP20

Warranty and Protection
Garantii	5 aastat
Protection	Reverse polarity Short circuit

Weight
Net weight	0.042kg
Gross weight	0.058kg

Mechanical Structures and Installations

1.The controller could auto check and output a proper voltage according to its LED quantities.

2.The controller works on buck mode, the voltage of power supply should be greater than the total voltage of the seried LEDs.

Match Remote Control (two match ways)

End user can choose the suitable match/delete ways. Two options are offered for selection:

Use the controller’s Match key

Match:
Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) on the remote.The LED indicator fast flash a few times means match is successful.

Delete:
Press and hold match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted.

Use Power Restart

Match:
Switch off the power, then switch on power again, immediately short press on/off key (single zone remote)or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful.

Delete:
Switch off the power, then switch on power again, immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.

Application notes

1.All the receivers in the same zone.

Auto-transmitting: One receiver can transmit the signals from the remote to another receiver within 30m,

as long as there is a receiver within 30m, the remote control distance can be limitless.

Auto-synchronization: Multiple receivers within 30m distance can work synchronously when they are controlled

by the same remote.

Receiver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range.

Strong signal sources such as WiFi routers and microwave ovens will affect the range.

We recommend for indoor applications that receiver placements should be no further apart than15m.

2.Each receiver(one or more) in a different zone, like zone 1, 2, 3 or 4.

Push Dim Function

The provided Push-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switchs.

Short press:

Turn on or off light.

Long press (1-6s):

Press and hold to step-less dimming,

With every other long press, the light level goes to the opposite direction.

Dimming memory:

Light returns to the previous dimming level when switched off and on again, even at power failure.

Synchronization:

If more than one controller are connected to the same push switch, do a long press for more than 10s,

then the system is synchronized and all lights in the group dim up to 100%.

This means there is no need for any additional synchrony wire in larger installations.

We recommend the number of controllers connected to a push switch does not exceed 25 pieces,

The maximum length of the wires from push to controller should be no more than 20 meetrit.

Dimming Curve

Malfunctions Analysis & Troubleshooting

Malfunctions

Causes

Troubleshooting

No light

1. No power.

2.Wrong connection or insecure.

1.Check the power.

2.Check the connection.

No response

from the remote

1.The battery has no power.

2.Beyond controllable distance.

3.The controller did not match the remote.

1.Replace battery.

2.Reduce remote distance.

3.Re-match the remote.

Controller Supply-HM-C1-

Q1.l see on okei OEM ja ODM ?

Soomusvalgustus on professionaalne OEM- ja ODM-tellimuste jaoks. Meil on rikkalik kogemus tootmise jätkamiseks ja hea kvaliteedi tagamiseks.

Q2. Mis on MOQ? Kas ma saaksin mõned näidised ?

Madal MOQ, 1 tk proovide kvaliteedi kontrollimiseks on saadaval Proovide tellimus on vastuvõetav ja tere tulemast teie projekti jaoks kohandatud näidised.

Q3. Kui pikk tarneaeg?

Näidisvajadused 3-5 ARMOR võib muuta teie disaini üha autentsemaks ja väärtuslikumaks, koguse tellimus vajab 10-15 päeva

Q4.Kuidas te kaupa saadate ja kui kaua selle kohalejõudmine aega võtab?

Tavaliselt saadame DHL-iga, UPS, FedEx või TNT. Tavaliselt kulub 3-5 päevad kohale jõudmiseks. Lennu- ja meretransport on samuti valikuline.

Q5.Kuidas jätkata kohandatud valguse tellimist ?

Esiteks, andke meile teada oma nõuded või joonis.Teiseks, tsiteerime vastavalt teie nõuetele. Kolmandaks, kinnitate ja korraldate makse ametliku tellimuse eest. Lõpuks, alustame tootmist ja korraldame saadetise.

Q6.Kui kaua garantii kehtib?

Kõik Armouri valgustustooted on kvaliteetsed 3 aastat, lf kohandatud projektitooted 5-aastase garantiiga.

Q7. Kas tootele logo printimine on õige ?

Jah, palun teavitage meid enne tootmist ametlikult ja kinnitage kujundus esmalt meie proovi põhjal.

Q8. Kuidas vigadega toime tulla?

Meie pakume 2, 3 ja 5 aastane piiratud garantii erinevat tüüpi toodetele või erinevatele valgustusprojektide nõuetele. Selle aja jooksul, kui klientidel on kvaliteediprobleeme ja see tõend on soomusvalgustuse inseneride poolt heaks kiidetud, soovime defektsed asendada uute kvalifitseeritud esemetega.

Pange tähele, et garantii ei võrdu elueaga. Meie toodete eluiga on üle 50 000 tunni.

Q9. Kas ma saan teie tehast külastada?

Muidugi,tere tulemast meie tehast külastama. Can annab meile teie külastuse ajakava enne kahte päeva teada ja teie huvitatud toodetest.

Q10. Kas olete tehas või kaubandusettevõte?

Ekspordime tehasest otse üle mereturule.

Q11. Kas tarnite LED-valgustust mõnele kuulsale kaubamärgipoele Lighting?

Jah,meie led-pood Lighting varustas LANCOME-ga , LEGO,JÄRGMINE,TREENER, Burt's Bee,Hasbro, Saapad，BRAUN,M&S jne.