Controller Supply-HM-C1

Controller Supply-HM-C1

4096 levels 0-100% dimming smoothly without any flflash.
Match with Skydance’s 2.4G single zone or multiple zone dimming remote control.
One RF controller accept up to 10 remote control.
Auto-transmitting function: Controller automatically transmit signal to another controller with 30m control distance.
Synchronize on multiple number of controllers.
Connect with external push switch to achieve on/off and 0-100% dimming function.

ສົ່ງອີເມວຫາພວກເຮົາ ຕິດຕໍ່ຕອນນີ້ Download as PDF

ລາຍລະອຽດຜະລິດຕະພັນ ຄຳຕິຊົມດຽວນີ້

Inpuf and Oufput
Input voliage	12-48VDC
Output voliage	3-46VDC
Ouput current	1CH,350mA/700mA
Output power	1.05W-16.1W(350mA) 2.1W-32.2W(700mA)
Ouput ype	Constant volage

Dimming data
Input signal	RF 2.4GHz + Push Dim
Control distance	30m(Barrier-free space)
Dimming gray scale	4096(2^12)levels
Dimming range	0 -100%
Dimming curve	Logarithmic

Safety and EMC
EMC standard (EMC)	EN301 489,EN 62479
Safety standard(LVD	EN60950
Radio Equipment(RED)	EN 300 328
Certification	CE,EMC,LVD,RED
Dimming curve	Logarithmic

Environment
Operation temperature	Ta: -30°C ~ +55°C
Case temperature (Max.)	T c:+85°C
IP rating	IP20

Warranty and Protection
ຮັບປະກັນ	5 ປີ
Protection	Reverse polarity Short circuit

Weight
Net weight	0.042kg
Gross weight	0.058kg

Mechanical Structures and Installations

1.The controller could auto check and output a proper voltage according to its LED quantities.

2.The controller works on buck mode, the voltage of power supply should be greater than the total voltage of the seried LEDs.

Match Remote Control (two match ways)

End user can choose the suitable match/delete ways. Two options are offered for selection:

Use the controller’s Match key

Match:
Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) on the remote.The LED indicator fast flash a few times means match is successful.

Delete:
Press and hold match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted.

Use Power Restart

Match:
Switch off the power, then switch on power again, immediately short press on/off key (single zone remote)or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful.

Delete:
Switch off the power, then switch on power again, immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.

Application notes

1.All the receivers in the same zone.

Auto-transmitting: One receiver can transmit the signals from the remote to another receiver within 30m,

as long as there is a receiver within 30m, the remote control distance can be limitless.

Auto-synchronization: Multiple receivers within 30m distance can work synchronously when they are controlled

by the same remote.

Receiver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range.

Strong signal sources such as WiFi routers and microwave ovens will affect the range.

We recommend for indoor applications that receiver placements should be no further apart than15m.

2.Each receiver(one or more) in a different zone, like zone 1, 2, 3 or 4.

Push Dim Function

The provided Push-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switchs.

Short press:

Turn on or off light.

Long press (1-6s):

Press and hold to step-less dimming,

With every other long press, the light level goes to the opposite direction.

Dimming memory:

Light returns to the previous dimming level when switched off and on again, even at power failure.

Synchronization:

If more than one controller are connected to the same push switch, do a long press for more than 10s,

then the system is synchronized and all lights in the group dim up to 100%.

This means there is no need for any additional synchrony wire in larger installations.

We recommend the number of controllers connected to a push switch does not exceed 25 pieces,

The maximum length of the wires from push to controller should be no more than 20 meters.

Dimming Curve

Malfunctions Analysis & Troubleshooting

Malfunctions

Causes

Troubleshooting

No light

1. No power.

2.Wrong connection or insecure.

1.Check the power.

2.Check the connection.

No response

from the remote

1.The battery has no power.

2.Beyond controllable distance.

3.The controller did not match the remote.

1.Replace battery.

2.Reduce remote distance.

3.Re-match the remote.

Controller Supply-HM-C1-

Q1.ls ມັນບໍ່ເປັນຫຍັງສໍາລັບ OEM ແລະ ODM ?

ແສງສະຫວ່າງປະຈໍາຕະກູນແມ່ນເປັນມືອາຊີບສໍາລັບການສັ່ງຊື້ OEM ແລະ ODM. ພວກເຮົາມີປະສົບການອຸດົມສົມບູນ toproceed ການຜະລິດແລະຮັບປະກັນຄຸນນະພາບທີ່ດີ.

Q2.ແມ່ນຫຍັງ MOQ? ຂ້ອຍສາມາດມີຕົວຢ່າງບາງຢ່າງໄດ້ ?

MOQ ຕໍ່າ, 1 pcs ສໍາລັບຕົວຢ່າງການກວດສອບຄຸນນະພາບແມ່ນມີຄໍາສັ່ງຕົວຢ່າງແມ່ນຍອມຮັບແລະຍິນດີຕ້ອນຮັບຕົວຢ່າງທີ່ກໍາຫນົດເອງສໍາລັບໂຄງການຂອງທ່ານ.

Q3.How long of the Lead time?

ຄວາມຕ້ອງການຕົວຢ່າງ 3-5 ມື້, ຈໍານວນຄໍາສັ່ງຕ້ອງການ 10-15 ມື້

Q4.How ເຈົ້າສົ່ງສິນຄ້າແນວໃດແລະມັນໃຊ້ເວລາດົນປານໃດທີ່ຈະມາຮອດ?

ປົກກະຕິແລ້ວພວກເຮົາຈັດສົ່ງໂດຍ DHL, UPS, FedEx ຫຼື TNT. ມັນມັກຈະໃຊ້ເວລາ 3-5 ມື້ທີ່ຈະມາຮອດ. ສາຍການບິນແລະການຂົນສົ່ງທາງທະເລຍັງມີທາງເລືອກ.

Q5.How ເພື່ອດໍາເນີນການຄໍາສັ່ງສໍາລັບແສງສະຫວ່າງທີ່ກໍາຫນົດເອງ ?

ທໍາອິດ, ໃຫ້ພວກເຮົາຮູ້ຄວາມຕ້ອງການຂອງທ່ານຫຼືການແຕ້ມຮູບ.ທີສອງ, ພວກເຮົາອ້າງອີງຕາມຄວາມຕ້ອງການຂອງທ່ານ. ອັນທີສາມ, ທ່ານຢືນຢັນແລະຈັດການຈ່າຍເງິນສໍາລັບຄໍາສັ່ງຢ່າງເປັນທາງການ.ສຸດທ້າຍ, ພວກເຮົາຈະເລີ່ມຕົ້ນການຜະລິດແລະຈັດການຂົນສົ່ງ.

Q6.How ດົນປານໃດສໍາລັບການຮັບປະກັນ?

ທັງຫມົດຂອງຜະລິດຕະພັນເຮັດໃຫ້ມີແສງ Armor ຄຸນນະພາບແມ່ນ 3 ປີ, lf ຜະລິດຕະພັນໂຄງການທີ່ກໍາຫນົດເອງທີ່ມີການຮັບປະກັນ 5 ປີ.

Q7.ls ມັນດີທີ່ຈະພິມ LoGo ຂອງຂ້ອຍຢູ່ໃນຜະລິດຕະພັນ ?

ແມ່ນແລ້ວ, ກະລຸນາແຈ້ງພວກເຮົາຢ່າງເປັນທາງການກ່ອນທີ່ຈະຜະລິດແລະຢືນຢັນການອອກແບບທໍາອິດໂດຍອີງໃສ່ຕົວຢ່າງຂອງພວກເຮົາ.

Q8.How to deal with the Faulty?

ພວກເຮົາສະເຫນີ 2, 3 ແລະ 5 ການຮັບປະກັນຈໍາກັດຂອງປີສໍາລັບປະເພດຕ່າງໆຂອງຜະລິດຕະພັນຫຼືຄວາມຕ້ອງການທີ່ແຕກຕ່າງກັນຂອງໂຄງການເຮັດໃຫ້ມີແສງ. ໃນໄລຍະນີ້, ຖ້າລູກຄ້າມີບັນຫາຄຸນນະພາບຫຼັກຖານສະແດງແລະຫຼັກຖານນັ້ນຖືກອະນຸມັດໂດຍວິສະວະກອນເຮັດໃຫ້ມີແສງປະຈໍາຕະກູນ, ພວກເຮົາຢາກຈະທົດແທນສິ່ງທີ່ມີຂໍ້ບົກພ່ອງດ້ວຍລາຍການທີ່ມີຄຸນນະພາບໃຫມ່.

ກະລຸນາສັງເກດວ່າການຮັບປະກັນບໍ່ເທົ່າກັບ lifespan. ຜະລິດຕະພັນຂອງພວກເຮົາມີຫຼາຍກ່ວາ 50000-hourlong lifespan.

Q9.Can ຂ້າພະເຈົ້າໄປຢ້ຽມຢາມໂຮງງານຜະລິດຂອງທ່ານ?

ແນ່ນອນ,ຍິນດີຕ້ອນຮັບໄປຢ້ຽມຢາມໂຮງງານຂອງພວກເຮົາ. ສາມາດໃຫ້ພວກເຮົາຮູ້ຕາຕະລາງການຢ້ຽມຢາມຂອງທ່ານກ່ອນສອງມື້ແລະຜະລິດຕະພັນທີ່ສົນໃຈຂອງທ່ານ.

Q10.Are ທ່ານໂຮງງານຜະລິດຫຼືບໍລິສັດການຄ້າ?

ພວກເຮົາແມ່ນໂຮງງານຜະລິດໂດຍກົງສົ່ງອອກໄປຕະຫຼາດທະເລ.

Q11.Do ທ່ານສະຫນອງແສງສະຫວ່າງນໍາກັບຮ້ານຂາຍຖ່ານກ້ອນທີ່ມີຊື່ສຽງໃດໆ Lighting?

ແມ່ນແລ້ວ,ຮ້ານນໍາພາຂອງພວກເຮົາເຮັດໃຫ້ມີແສງສະຫນອງໃຫ້ແກ່ LANCOME , LEGO,ຕໍ່ໄປ,ຄູຝຶກສອນ, ເຜິ້ງ Burt,Hasbro, ເກີບ，BRAUN,ມ&S ແລະອື່ນໆ.