×
Controller Supply-HM-C1
Controller Supply-HM-C1
Fornecimento do Controlador-HM-C1
  • 4096 níveis 0-100% escurecendo suavemente sem qualquer flash.
  • Match with Skydance’s 2.4G single zone or multiple zone dimming remote control.
  • One RF controller accept up to 10 remote control.
  • Função de transmissão automática: Controller automatically transmit signal to another controller with 30m control distance.
  • Sincronize em vários números de controladores.
  • Connect with external push switch to achieve on/off and 0-100% dimming function.
Detalhes do produto Feedback agora

 

 

 

Inpuf and Oufput
Input voliage 12-48CCV
Output voliage 3-46CCV
Ouput current 1CH,350mA/700mA
Output power 1.05W-16.1W(350mA)

2.1W-32,2W(700mA)

Ouput ype Constant volage

 

Dimming data
Input signal RF 2.4GHz + Push Dim
Control distance 30m(Espaço sem barreiras)
Escurecimento da escala de cinza 4096(2^12)níveis
Dimming range 0 -100%
Dimming curve Logarithmic

 

 

Segurança e EMC
Padrão EMC (EMC) EN301 489,EN 62479
Padrão de segurança(LVD EN60950
Equipamentos de rádio(VERMELHO) EM 300 328
Certificação ISTO,EMC,LVD,VERMELHO
Dimming curve Logarithmic

 

 

Ambiente
Temperatura de operação Ta: -30°C ~ +55°C
Case temperature (Máx.) T c:+85°C
Classificação de IP IP20

 

 

Warranty and Protection
garantia 5 anos
Protection Reverse polarity
Short circuit

 

 

Peso
Net weight 0.042kg
Peso bruto 0.058kg

 

 

 

 

 

Mechanical Structures and Installations

 

 

1.The controller could auto check and output a proper voltage according to its LED quantities.

2.The controller works on buck mode, the voltage of power supply should be greater than the total voltage of the seried LEDs.

 

 

Match Remote Control (two match ways)

 

End user can choose the suitable match/delete ways. Two options are offered for selection:

 

Use the controller’s Match key

Match:
Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) on the remote.The LED indicator fast flash a few times means match is successful.

Delete:
Press and hold match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted.

Use Power Restart

Match:
Switch off the power, then switch on power again, immediately short press on/off key (single zone remote)or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful.

Delete:
Switch off the power, then switch on power again, immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.

 

 

Application notes

1.All the receivers in the same zone.

 

 

 

Auto-transmitting: One receiver can transmit the signals from the remote to another receiver within 30m,

as long as there is a receiver within 30m, the remote control distance can be limitless.

Auto-synchronization: Multiple receivers within 30m distance can work synchronously when they are controlled

by the same remote.

Receiver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range.

Strong signal sources such as WiFi routers and microwave ovens will affect the range.

We recommend for indoor applications that receiver placements should be no further apart than15m.

 

2.Each receiver(one or more) in a different zone, like zone 1, 2, 3 ou 4.

 

Push Dim Function

The provided Push-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switchs.

 

  • Short press:

Turn on or off light.

  • Long press (1-6s):

Press and hold to step-less dimming,

With every other long press, the light level goes to the opposite direction.

  • Dimming memory:

Light returns to the previous dimming level when switched off and on again, even at power failure.

  • Synchronization:

If more than one controller are connected to the same push switch, do a long press for more than 10s,

then the system is synchronized and all lights in the group dim up to 100%.

This means there is no need for any additional synchrony wire in larger installations.

We recommend the number of controllers connected to a push switch does not exceed 25 pieces,

The maximum length of the wires from push to controller should be no more than 20 metros.

 

 

Dimming Curve

 

 

 

Malfunctions Analysis & Troubleshooting

 

Malfunctions Causes Troubleshooting
No light 1. No power.

2.Wrong connection or insecure.

1.Check the power.

2.Check the connection.

No response

from the remote

1.The battery has no power.

2.Beyond controllable distance.

3.The controller did not match the remote.

1.Replace battery.

2.Reduce remote distance.

3.Re-match the remote.

 

 

Controller Supply-HM-C1-

Controller Supply-HM-C1-

 

Controller Supply-HM-C1-

 

Controller Supply-HM-C1-

 

Controller Supply-HM-C1-

LED Neon Flexível HM-13*12mm Impermeável IP67 ?

A iluminação da armadura é profissional para pedidos OEM e ODM. LED Neon Flexível HM-13*12mm Impermeável IP67.

 

LED Neon Flexível HM-13*12mm Impermeável IP67? LED Neon Flexível HM-13*12mm Impermeável IP67 ?

MOQ baixo, 1 LED Neon Flexível HM-13*12mm Impermeável IP67.

 

LED Neon Flexível HM-13*12mm Impermeável IP67?

Necessidades de amostra 3-5 dias, o pedido de quantidade precisa de 10-15 dias

 

LED Neon Flexível HM-13*12mm Impermeável IP67?

Nós geralmente enviamos por DHL, UPS, FedEx ou TNT. geralmente leva 3-5 geralmente leva.

 

geralmente leva ?

Primeiro, deixe-nos saber seus requisitos ou desenho., geralmente leva, você confirma e organiza o pagamento do pedido formal., geralmente leva.

 

geralmente leva?

A qualidade de todos os produtos de iluminação da Armor é 3 anos, geralmente leva.

 

geralmente leva ?

sim, geralmente leva.

 

geralmente leva?

Nós oferecemos 2, 3 e 5 geralmente leva. Durante este período, geralmente leva, geralmente leva.

Observe que a garantia não é igual à vida útil. Nossos produtos têm mais de 50.000 horas de vida útil.

 

Observe que a garantia não é igual à vida útil. Nossos produtos têm mais de 50.000 horas de vida útil?

Certo,bem-vindo para visitar nossa fábrica. Observe que a garantia não é igual à vida útil. Nossos produtos têm mais de 50.000 horas de vida útil.

 

Q10. Você é fábrica ou empresa comercial?

Somos a fábrica e exportamos diretamente para o mercado marítimo.

 

Q11. Você fornece iluminação LED para qualquer loja de marca famosa. Iluminação?

sim,a iluminação de nossa loja de leds foi fornecida para LANCOME , LEGO,NEXT,TREINADOR, Observe que a garantia não é igual à vida útil. Nossos produtos têm mais de 50.000 horas de vida útil,Hasbro, Chuteiras,BRAUN,M&S etc.

 

 

 

Envie sua mensagem para nós:
INQUÉRITO AGORA
INQUÉRITO AGORA